3, using a wide voltage design 110 ~ 260V (high pressure models), 20 to 40 (low voltage).
4, the use of glare to
Rotating Beacon shade softer, non-glare, operators will not cause eye fatigue and improve work efficiency;
5, good electromagnetic compatibility of power will not cause pollution.
6, the outer light alloy materials, corrosion resistant, waterproof and dustproof.
7, transparent pieces of plastic material imported bullet-proof, high transmittance, good impact resistance, make the lamps in a variety of harsh environment to work properly.
8, the emergency power polymer lithium battery, security, efficiency, long service life.
9, user-friendly design: the ability to automatically or manually switch the emergency function.
LED light source as the need for emergency
A sign of our light sources currently used mainly in the following categories:
(1) compact fluorescent lamps;
(2) incandescent lamp;
(3) electroluminescent screen;
(4) high-brightness LED
Fluorescent and incandescent light as a traditional symbol of the source in the world has been widely applied. Application of a total of about 80% of the total lights. China is the first to promote the use of electroluminescent and LED light source of the country as a symbol. Since the national standard GB17945-2000 "Emergency lighting" was promulgated, the National Fire Electronic Product Quality Supervision and Inspection Center according to the standards of China in the production and sales of fire emergency lighting products have been tested. Inspection of product categories from the statistical point of view, to fluorescent lights, incandescent lights for the light source about 50% of the total number; to electroluminescent light source lights for the taking of the other 50% share, there are few LED light source the lights. In the persistent efforts of the industry, the past two years, with LED lights for the light source for its long life, beauty, power and other advantages have been developing rapidly. Accounting for almost all subjects the number of lights, 1 / 3. And to fluorescent and incandescent lights for the light source is dwindling share, has reduced the number of lights to all subjects of 1 / 3. However, due to historical reasons, to fluorescent, incandescent and electroluminescent signs light as the light source, the field is still in use a large share, is not conducive to create a conservation-oriented society.
Classification of LED emergency lights
One is as a work light, but also has emergency functions;
The other is simple as emergency lighting, usually in the off state.
Two kinds of emergency are in the main electrical power can be immediately launched the emergency lighting can also be controlled via an external switch.
LED Emergency Light - Notes
1, the transport will be equipped with lamps mounted on the carton, and install foam cushioning.
2, the installation of lamps, the lamps should be the nearest safe ground.
3, when used, has some light surface temperature, is a normal phenomenon; transparent pieces of center temperature is higher, shall not touch.
4, maintaining the lamps, you must first disconnect the power.
LED Emergency Light - Security Warning
1, replace the light source and power supply must be disconnected before demolition lamps;
2, non-charged open lamps.
3, view or change the source line should be put on a clean white gloves.
4, non-professionals are not free to install and remove lighting.
